Grouped by application. For full model specifications and TDS/SDS, please contact JIASEN.
1K/2K structural, potting, repair and low-temperature epoxy for cores, inductors, transformers, CFRP, sensors and electronic potting.
| Model | Type | Color | State | Temp. Range | Typical Application |
|---|---|---|---|---|---|
| JS-9500 / 9500HF | 1K general / low-halogen | Gray | Paste | -40~180℃ | Inductors, transformers, high-speed motors |
| JS-9757 / 9757HF | 1K general | Gray | Paste | -40~140℃ | Auto headlamp lens/reflector, inductor coils |
| JS-909 / 9439 / 9432 | 1K high strength | Gray | Paste | -40~160℃ | Inductors, transformers, PCB, CFRP parts |
| JS-9939 / 9214 | 1K high strength | Gray | Paste | -40~220/160℃ | CFRP, sports equipment, displays |
| JS-3120 / 3125 / 3206 | 1K potting | Gray/Black | Paste | -40~180℃ | Calculators, buzzers, harness, COB |
| JS-9005 / 9020 / 9030CL | 2K structural | Multi | Liquid | -55~150℃ | Flex circuits, electronics, high-speed rail |
| JS-9120 / 9130 / 9300L3 | 2K structural | Amber/White | Liquid | -55~250℃ | Mechanical assembly, motors, high temp. |
| JS-1101~1103 / 9113~9119 | 2K repair / wear-resistant | Gray/Metal | Paste | -55~280℃ | Casting defect repair, wear protection |
| JS-2651 / 2651MM / 2850 series | 2K potting | Black/Blue | Hi-visc. | -60~250℃ | Hi-end electronic potting, sensors |
| JS-3119 / 3129 / 3220 / 3280 | Low-temp epoxy struct. | Black/White | Paste | Low-temp cure | Camera/CMOS/CCD modules, FPC |
Note: representative models shown. For the full list with cure schedules and shear strength, contact JIASEN for the product catalog PDF.
Electronic component fixing, solder joint protection, silicone conformal coating, thermally conductive potting (condensation / addition cure).
| Model | Category | Color | Feature | Packaging |
|---|---|---|---|---|
| JS-107 / 108 / 109 | Component fixing | White/Gray/Black | Fast skin, high extrusion, strong bond | 80g/300ml/2600ml |
| JS-7091 | Component fixing | White | Strong bond | 300ml/2600ml |
| JS-1872 | Thermal fixing | White | Thermal conduct. 0.8~2.0W | 80g/300ml/2600ml |
| JS-131(S) / 3140 / 9186 / 397 | Solder joint protect | Translucent/Black | Fast skin, deep cure | 50ml/300ml/18kg |
| JS-9577 / 2577 / 5293 | Silicone conformal | Clear/Pale yellow | UV/moisture dual cure opt. | 300ml/1L |
PU potting, structural, 2K thermally conductive structural and PUR hot melt adhesives for electronic sealing, battery pack bonding and consumer assembly.
| Model | Category | Color | Feature | Application |
|---|---|---|---|---|
| JS-110 / 110L / 386 / 586 / 1268 | PU potting | Black/Gray/Yellow | Impact resist., hi/lo-temp, flame retardant | Auto electronics, capacitors, ignition coils |
| JS-280~287 / JS-131 | PU structural | White/Black/Blue | Thermal 0.3~2.0W, hi shear | EV battery pack structural bonding |
| JS-261 / 263 / 265 | 2K thermal struct. | Blue/Yellow | Thermal 1.2~2.0W | Battery pack thermal-structural bonding |
| JS-3651 / 3652 / 3630 / 3631 / 3661 | PUR hot melt | White/Black | Open time 2~8min, tensile≥8MPa | Consumer electronics, PC/Al-Mg assembly |
Threadlockers, pipe thread sealants and retaining compounds - single component, anaerobic cure on metal contact.
| Model | Category | Color | Application |
|---|---|---|---|
| JS-222 / 243 / 962T / 263 / 271 / 272 / 277 / 290 | Threadlocker | Purple/Blue/Red/Green | M2~M50 thread locking & sealing |
| JS-545 / 554 / 567 / 569 / 577 | Pipe sealant | Purple/Red/Off-white/Brown/Yellow | Hydraulic, refrigeration, stainless, fire pipe |
| JS-609 / 620 / 638 / 680 | Retaining | Green | Bearing/shaft, gear/shaft, bushing/hole retaining |
2K structural acrylics (fast cure, impact resistant) and acrylic conformal coatings.
| Model | Category | Color | Feature |
|---|---|---|---|
| JS-8815 / 8818 / 8671 / 8673 | Acrylic struct. | Green | Room-temp cure, hi peel/shear/impact |
| JS-315 / 326 / 3275 | Acrylic struct. | Blue/Lt.yellow/Brown-red | Thermal struct. / general |
| JS-9102 / 9111 | Acrylic conform. | Fluor. blue translucent | Conformal coating, widely for PCB |
Ethyl / alkoxy instant adhesives for metal, plastic, rubber, wood/leather/paper - fast drying and easy to use.
| Model | Typical Use | Color | Viscosity (mPa·s) |
|---|---|---|---|
| JS-401 | Wood/leather/paper | Clear | 90~140 |
| JS-406 / 495 | Plastic/rubber | Colorless/transp. | 15~60 |
| JS-415 / 480 | Metal/rubber/plastic | Translucent/clear | 100~1600 |
| JS-403 / 460 | Metal/rubber/plastic | Clear | 30~1650 |
| 2# / 3# / 4# | Nail primer/accel./top | Clear | — |
| JS-770SF | CA primer | Slightly cloudy | 1.25 |
Glass/metal/plastic bonding, medical devices, camera modules, PVC/PC bonding; UV + anaerobic dual cure optional.
| Model | Typical Application | Color | Viscosity (mPa·s) |
|---|---|---|---|
| JS-3345 / 3942 / 4311 | Glass/metal, medical assembly | Lt.straw/clear | 600~2000 |
| JS-3311 / 3311LV3 / 013 | PVC to PC, disposable medical | Clear | 90~400 |
| JS-3726PET / 3726PPA | PET/PEEK/metal/plastic | Clear/pale straw | 2000~3500 |
| JS-3094 / 3103 | PMMA/PC/ABS/PVC/glass/metal, conformal | Clear | 100~14500 |
| JS-352 / 3493 / 9211 / 3705 / 3321 / 3318LV | Glass thinning/sealing/high-volume | Clear/red | 968~44000 |
Electronic component encapsulation and protection, UL94 V-0, for low-pressure injection molding of modules, connectors and sensors.
| Model | Color | Hardness (Shore) | Soft. Pt. (℃) | Service Temp. (℃) |
|---|---|---|---|---|
| JS-8201 / 8202 | Black | 36D | 158 | -40~110 |
| JS-8205 / 8206 / 8207 | Black | 45D/90A/90A | 180~190 | -40~150 |
| JS-8208 | Black | 82A | 155 | -40~100 |
| JS-8210 | Black | 62D | 205 | -20~160 |
Need full TDS/SDS or samples for a specific model? Go to Contact Us →
JIASEN New Materials